FORTLUFT 4401075 Exhaust Flex Connector With Extension Pipes Stainless Steel, 1.50''x4.00''x8.00''/38x102x203mm

• Universal, Fully Stainless Steel, Two Layers Bellows, Double Braid, Nonmagnetic
• FORTLUFT provides the warranty for the Exhaust Flex Connector Extension Pipes tightness for the 12 months period or during the next 15000 miles (24000 km), after the spare part installation.
• Universal Exhaust Flex Connector Extension Pipes are a part of the exhaust system of the car. This spare part is used to reduce vibration that allows your car to be more comfortable and enjoyable in use.
• A key feature of this exhaust flex is the pipes welded to the standard connectors (Standard Caps). This spare part is extremely relevant and is an ideal variant to be chosen when the exact length of the exhaust flex is unknown: the presence of extension pipes allows to install of this element using clamps or by the “pipe-to-pipe” welding method and accurately match the right size.

Exhaust Flex Connector Extension Pipes

Exhaust Flex Connector Extension Pipes FORTLUFT consists of four layers. The outer and inner layers are made from weaving stainless wire. Between these layers, there is a double layer bellow, also made of stainless steel. Standard Caps with connectors are installed on both sides of the exhaust flex pipe. They securely fasten all four layers and allow them to integrate this spare part into the exhaust system by welding pipes or clamps.

A malfunctioning exhaust flex pipe can be easily replaced with a new one without the necessity to purchase the entire exhaust unit. Moreover, there is no need to remove the whole exhaust system. Only to cut out the failed exhaust flex pipe and install a new spare part using the welding method or clumps instead would be enough.